BougeRV portable AC duct window/wall quick connect magnetic mount 132mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic mount designed to allow the duct hose to be quickly connected to a wall or window mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on Max's model, I imported the 3mf file into Fusion as a mesh to use as the base for my reverse engineering modifications (first time doing this!). with the following adjustments:
16 holes for 10mmx5mm magnets as these are the ones I had
inner diameter now accepts the BougeRV duct which has a diameter of about 132/3 mm
Redesigned the mount plate pretty much from scratch
Designed a new cover plate with a handle to make it a bit easier to remove it once the magnets are holding tight.
I felt 16 of these 10x5 magnets was going to be plenty strong enough. I'm going to try the cover plate with just 4 magnets to begin with as I want it to stay in place but not be a pain to pull off when desired. I've printed this on a Mk4s in PETG 0.4mm nozzle and on the Speed Setting. No print issues at all.
I disabled supports for the magnet holes- the slicer thinks you will need supports, my experience disagrees and I was concerned that removing the supports from a small closed bottom hole was going to be a complete pain- your mileage may vary! I did use organic supports for the handle of the cover plate.
Please let me know how you get on, all feedback welcome!
Mike