LR60 to LR41 parametric coin cell battery adapter (AG1 to AG3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can substitute almost any smaller coin cell for almost any other coin cell if you can make it fit!
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 18
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Make sure you print with Arachne mode on as it has thin walls to grip the battery.
I needed a LR41 but I only had LR60 batteries.
I made this adapter parametric, so you just need to put in 4 dimensions:
Larger battery diameter & height
Smaller battery diameter & height
You can use the table I added as a photo here that I found on Google images. Put in the dimensions as-is, I have offsets in seperately.
You may need to adjust the offset size to increase the side hole if you are adapting a very small battery to a very large battery.
This adapter works on devices where there is a side terminal and a bottom terminal. If you have a device with top and bottom connectors it won't work, as the battery would need to be thicker. You could try remove the top side and add some aluminium foil but I didn't have a need for it with my device. (I added an example picture of the thermometer I used it in)