LR60 to LR41 parametric coin cell battery adapter (AG1 to AG3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can substitute almost any smaller coin cell for almost any other coin cell if you can make it fit!
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 1
- Views
- 17
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Make sure you print with Arachne mode on as it has thin walls to grip the battery.
I needed a LR41 but I only had LR60 batteries.
I made this adapter parametric, so you just need to put in 4 dimensions:
Larger battery diameter & height
Smaller battery diameter & height
You can use the table I added as a photo here that I found on Google images. Put in the dimensions as-is, I have offsets in seperately.
You may need to adjust the offset size to increase the side hole if you are adapting a very small battery to a very large battery.
This adapter works on devices where there is a side terminal and a bottom terminal. If you have a device with top and bottom connectors it won't work, as the battery would need to be thicker. You could try remove the top side and add some aluminium foil but I didn't have a need for it with my device. (I added an example picture of the thermometer I used it in)