M.2 SSD Kühler für PCI Slotblech.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M.2 SSD Kühler für PCI Slotblech. 3 Teile.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
M.2 Kühler für extrem heiße GEN 5 SSD's mit montierten Kühlkörper die sich zwischen GPU und CPU-Kühler befinden.
Kühlt um 25grad Celsius runter bei einer Raumtemperatur von 30grad Celsius. (>85grad Celsius auf <60grad Celsius)
Verwendetes PC Gehäuse: Cooler Master MasterCase SL600M Black Edition.
Für 2 ARCTIC S4028-6K oder S4028-15K Lüfter mit 4-PIN PWM Anschluss.
Der M.2 Kühler wird mit einem 2-fach PCI Slotblech Adapter (aus PETG) an das PC Desktop Gehäuse in den oberen beiden PCI Slots befestigt.
Der Zusammenbau gestaltet sich etwas fummelig und es sollten zwei ruhige Hände vorhanden sein.
Die 2 Lüfter müssen so Montiert werden das die Luft in das PC Gehäuse gelangt.
3 Teile, bestehend aus:
● 2-fach PCI Slotblech für die 2 Lüfter.
● Adapter für den Aktivkohle Filter.
● Gitter Einsatz für den Aktivkohle Filter.
Notwendige Bauteile:
● 2x ARCTIC S4028-6K Lüfter.
● 8x M3 Ruthex Gewindeeinsätze.
● 8x M3x37mm Zylinderschrauben oder Senkschrauben +Senker.
● 1x Aktivkohle Filter 84x40x10mm.
● 2x Gummiband.
Notwendiges Werkzeug:
● 3mm Innensechskant Schlüssel.
● Lötkolben zum Einschmelzen der M3 Ruthex Gewindeeinsätze.
● Schere zum passgenauen Ausschneiden des Aktivkohle Filters.
● 3mm Bohrer mit Handgriff/Akkuschrauber zum Reinigen der acht 3mm Löcher.
Empfohlene Software:
● FanControl zur dynamischen Drehzahl Steuerung der beiden Lüfter.
English:
M.2 cooler for extremely hot Gen 5 SSDs with preinstalled heatsinks located between the GPU and CPU cooler.
Cools down by 25 degrees Celsius at an ambient room temperature of 30 degrees Celsius. (>85 degrees Celsius down to <60 degrees Celsius)
PC case used: Cooler Master MasterCase SL600M Black Edition.
Designed for 2x ARCTIC S4028-6K or S4028-15K fans with a 4-pin PWM connector.
The M.2 cooler is attached to the upper two PCI slots of the desktop PC case using a dual PCI slot bracket adapter (made of PETG)
Assembly is a bit finicky and requires a steady hand.
The two fans must be mounted so that the airflow is directed into the PC case.
3 parts, consisting of:
● Dual PCI slot bracket for the 2 fans.
● Adapter for the activated carbon filter.
● Mesh insert for the activated carbon filter.
Required components:
● 2x ARCTIC S4028-6K fans.
● 8x M3 Ruthex threaded inserts.
● 8x M3x37mm socket head screws or countersunk screws + countersink tool.
● 1x Activated carbon filter 84x40x10mm.
● 2x Rubber bands.
Required tools:
● 3mm Allen key (Hex key).
● Soldering iron for heat-setting the M3 Ruthex threaded inserts.
● Scissors for precision cutting of the activated carbon filter.
● 3mm drill bit with a manual handle or cordless screwdriver to clean out the eight 3mm holes.
Recommended software:
● FanControl for dynamic speed regulation of both fans.