Shim Bushings for Prusament NFC Spools on Pastamatic Target Spindle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps center the target spindle in order to even out the filament loading on Prusament NFC spools.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently printed a Pastamatic winder and the associated leadscrew for Prusament spools. The first time I used it, the filament loaded on the target spool was lopsided. It turned out the leadscrew timing was off in relation to the target spool. So, I designed some bushings for both sides of the target spindle. The shim bushing is beveled on both ends.. I ended up using around 25mm shimming for NFC spools. You also may have to adjust the overall length of the undriven shim to fit your particular winder. These shims do fit TIGHT.
As always, enjoy and let me know what you think.