Propane Tank Cap (Multicolor/Multibody) - ACME QCC-1 (CGA V-1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap designed for a standard propane tank. ACME QCC-1 (CGA V-1) thread pitch and count with appropriate thread runout.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Customizable cap designed for a standard propane tank. ACME QCC-1 (Compressed Gas Association V-1) thread pitch and count with appropriate thread runout. I took the design a little further than a simple single color part; this model is AMS ready including multibody parts. I ran this through a stack up tolerancing as well to accommodate various FDM printers based on a .4mm nozzle diameter and the base design geometry outlined below.
Design Principles Used In Base Design:
Nominal Major Diameter: 1.3125"
Pitch: 0.2"
Height: 0.1"
V-Angle: 29 degrees
Crest Flat Width: 0.0741"
Designed in Solidworks