Mark4 7" Side Bumper / Electronics Protector for FPV Drone Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your Mark4 7-inch FPV drone's flight controller, ESC, and VTX with this smart side protect!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This side cover is specifically designed to close the open gap between the top and bottom carbon plates of the GEPRC Mark4 7" frame. Unlike simple arm guards, this part shields the most vulnerable area of your drone – the electronics stack and soldered wire connections to the flight controller.
Key Advantages:
Electronics Protection: Shields the FC, ESC, and VTX from dirt, grass, and impact during crashes.
Wire Guard: Prevents accidental unplugging or damage to the wires soldered to the flight controller.
Super Easy Installation: No modification needed. Simply remove the top plate, slide the bumper over the vertical standoffs, and screw the top plate back on. Fits perfectly without disassembling the electronics.
Smart Ventilation Design: Features vertical slots that allow constant airflow, ensuring proper cooling for your VTX and ESC even during aggressive freestyle flights.
Lightweight & Durable: Adds minimal weight while providing maximum protection.