Small Slimline Remote Holder / Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact, wall mount designed for slim light remotes. With countersunk screw holes and an open-front for easy access.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of misplacing the small remote for your LED lights? This is a sleek, low-profile wall mount designed specifically to keep small, slim remotes right where you need them. While originally modeled for outdoor lighting controllers, its open-front, slide-in design makes it highly versatile for any similarly sized remote.
It features built-in countersunk mounting holes for a flush finish, and robust walls so it won't snap during daily use.
Dimensions
Inner Depth: 0.305” (7.75 mm)
Inner Width: 1.575” (40.0 mm) (1.525" flat face + corner fillets)
Height: 1.625” (41.3 mm)
Wall Thickness: 0.125" (3.2 mm)
Mounting: Built-in countersunk holes sized for standard #8 screws.
Print Settings
Material: PLA works great for indoor use. (If mounting outdoors in direct sunlight, PETG or ASA is recommended!).
Layer Height: 0.20mm (Standard)
Infill: 15% - 20% (Grid or Gyroid)
Supports: None needed!
Custom Requests
Is your slim remote a slightly different size? If you need a variant tailored to a specific set of dimensions for this style of sleeve mount, drop a comment below with your measurements. I'll do my best to upload a custom file for you!