Decora-style switch built from IKEA BILRESA two-button remote (no PCB Disassembly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using an IKEA BILRESA inside a case that adds Decora style buttons with no disassembly required.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The IKEA BILRESA two-button remotes are a very inexpensive way to add a programmable wireless switch to a smart home setup and as they support matter easily work with any smart home setup. Unfortunately, due to their design they standout quite a bit when compared to the decora light switches the rest of your home likely uses.
Taking inspiration from Isaac's work I remixed the model to no longer require disassembly of the remote itself. It is a simple throw the remote into this new case and put Isaac's original mounting plate and slightly modified toggle rocker(added two small pegs to press the buttons on the bilresa) over the top of it.
⚠⚡🔥 Putting these in an electrical box with live household wires may be a fire hazard.
I wouldn't put this into the same box as 120VAC devices, unless maybe it was printed in a UL94 V-0 fire-resistant material. It also may not be up to code to do so. But you do you—at your own risk.