Flashforge AD5X - Alternate part cooling fan cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for use with Ender 3 style hotend mods, but can also be used with the stock hotend.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store
Modified fan cover for the Flashforge AD5X.
This is designed to be - but doesn't have to be - used together with my Ender 3 style hotend mod. When using this mod, the stock fan cover (or those that emulate it) will not fit, so a modified version is necessary.
That being said - if you're not using the Ender 3 hotend mod, I have a much better fan cover: https://www.printables.com/model/1780070-flashforge-ad5x-replacement-part-cooling-fan-cover
Requires the fan and PCB from an existing fan cover, and two 5x2mm circular magnets.
DO NOT USE PLA OR PETG FOR THIS MODEL. It must be printed in at least ABS due to the heat it will be exposed to. PC or PA-CF would be even better, if you are able to do so - especially if actually using this as part of an Ender 3 hotend mod.
Print as oriented in the STEP file (large flat surface on the build plate). Supports are not required.
Your choice which version you prefer. The original model I remixed this from has the hex holes. I don't like these personally, so I also created a version without them.
Please note: If you rely on your part cooling fan to help with air circulation while heat soaking, you may find you need to place the print bed slightly higher during heat soaking than you are used to when using this modified fan.