1 / 1
Screw storage case for GONG V2 carbon hydrofoil set — zdjęcie 1

Screw storage case for GONG V2 carbon hydrofoil set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This box can be used to store all 8 screws necessary for assembly of the GONG V2 carbon set.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This box can be used to store all 8 screws necessary for assembly of the GONG V2 carbon set.

The case can fit screws up to a length of 35mm.

What you need to print:

  • 1x foil_screwbox_1.3mf (Recommended in PETG)

  • 1x foil_screwbox_mesh.3mf (Recommended in TPU 82A)

  • 8x foil_screwbox-Stopper.3mf (Recommended in TPU 82A)

What screws are required for assembly:

  • 6x M4x20

  • 4x M4x8

Each hole fits a small stopper that grips the screws slightly so they don't easily fall out of the case. It can be printed from any soft material. I used 82A hardness TPU, if you use any harder material you might struggle with inserting them into the hole.

Tagi