Screw storage case for GONG V2 carbon hydrofoil set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box can be used to store all 8 screws necessary for assembly of the GONG V2 carbon set.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This box can be used to store all 8 screws necessary for assembly of the GONG V2 carbon set.
The case can fit screws up to a length of 35mm.
What you need to print:
1x foil_screwbox_1.3mf (Recommended in PETG)
1x foil_screwbox_mesh.3mf (Recommended in TPU 82A)
8x foil_screwbox-Stopper.3mf (Recommended in TPU 82A)
What screws are required for assembly:
6x M4x20
4x M4x8
Each hole fits a small stopper that grips the screws slightly so they don't easily fall out of the case. It can be printed from any soft material. I used 82A hardness TPU, if you use any harder material you might struggle with inserting them into the hole.