Radiator hose pinch clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to pinch radiator hoses and/or other hoses that are soft enough.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clamp to pinch radiator hoses and/or other hoses that are soft enough.
Scale each part by what ever percentage you want to make tool bigger or smaller.
CapPin and Cap get glued together. They hold 2 handles together and they block the slide ring to slip thru the front.
Insert the slide ring on the handles 1st, then insert ring and the pin into the center, effectively locking the slide ring on the handle.
Print Settings
Notes:
Print 2 handles. No need to mirror or anything.
Printing in ABS will help preventing tool meltdown if used on a hot engine.
If used on cold parts, PLA is ok.
For strength, its best to do 100% solid print
Reupload from Thingiverse from user tonycstech