1 / 2
Wedge Mount for Unifi Doorbell Lite - 15° to 45° — zdjęcie 1
1 / 2

Wedge Mount for Unifi Doorbell Lite - 15° to 45°

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wedge Mount for Unifi Doorbell Lite, with STL files for 15 through 45 degrees and a Fusion 360 configurable file

Ocena
5 / 5
Polubienia
6
Pobrania
69
Wydruki
1
Wyświetlenia
224
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1 + GAtt v1 + Micro v1

Wedge Mount for the Unifi Doorbell Lite to optimize the angle, as an alternative for the original wedge of 20°. 

Details

  • Optimized for easy printing and strength

  • STLs provided for 15°, 20°, 25°, 30°, 35°, 40° & 45°

  • Configurable F360 file included to optimize for alternate angles (15° to 45°) or screw sizes/inserts.

  • The side walls are square, which works best especially for larger angles. The original Unifi wedge is tapered, which results in an odd trapezoid foot at larger angles.

Printing Instructions

  • Any material will work, PETG or ASA recommended for outdoor conditions.

  • 3 perimeters, 15% infill works well.

Mounting hardware

  • 2x 4 mm dia. flat head screws for the wall/door frame attachment

  • 2x 3 mm dia. screw for mounting the plate. The printed hole is 2.6 mm, it should just screw in

  • No inserts required, but the F360 file can be modified to accept inserts.

I've tested and installed the 35 degrees version, printed in PETG.

Tagi