Wedge Mount for Unifi Doorbell Lite - 15° to 45°
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.05 – €1.28 net (excluding VAT)
For file: Doorbell_Wedge_0.4n_0.2mm_PETG_MK4IS_58m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.17 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 58.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wedge Mount for Unifi Doorbell Lite, with STL files for 15 through 45 degrees and a Fusion 360 configurable file
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 1
- Views
- 230
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Open Community License v1.1 + GAtt v1 + Micro v1
Wedge Mount for the Unifi Doorbell Lite to optimize the angle, as an alternative for the original wedge of 20°.
Details
Optimized for easy printing and strength
STLs provided for 15°, 20°, 25°, 30°, 35°, 40° & 45°
Configurable F360 file included to optimize for alternate angles (15° to 45°) or screw sizes/inserts.
The side walls are square, which works best especially for larger angles. The original Unifi wedge is tapered, which results in an odd trapezoid foot at larger angles.
Printing Instructions
Any material will work, PETG or ASA recommended for outdoor conditions.
3 perimeters, 15% infill works well.
Mounting hardware
2x 4 mm dia. flat head screws for the wall/door frame attachment
2x 3 mm dia. screw for mounting the plate. The printed hole is 2.6 mm, it should just screw in
No inserts required, but the F360 file can be modified to accept inserts.
I've tested and installed the 35 degrees version, printed in PETG.