RC10SC7 Indestructible Body Posts (Screw-On Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy-duty body posts for Team Associated RC10SC7. Reinforced with M4 bolts. Screw-on nuts, no body clips!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This upgraded SC7 body post design is built to be virtually indestructible. By reinforcing the post with a through-bolt and replacing traditional body clips with a robust screw-on nut, it can handle the hardest tumbles without snapping or losing clips.
Print 2x of all files, except:
Body post nut.stl Print 4x
body post_pos+1_spacer.stl Print as many as needed for your desired height.
Without any spacers, the posts sit at the second-lowest original position (Position 2). Adding one spacer equals one step higher in the original body post positioning.
Also needed
4pcs M4 bolts/screws
Length: M4x40mm is the perfect length if you are using either no spacers or just one spacer. If you use more spacers, you will need correspondingly longer bolts.
The printed threads on the parts are designed to be tight. I highly recommend cleaning them up with an M4 thread tap after printing to ensure the nuts spin smoothly.
Recommended material: PETG