Liczymy pasujące modele…
(NOW with added "EZ Print" STL to print as one part) This isn't the first design for an MMCX connector to be added to KSC75, but this is the best design for an MMCX connector for the KSC75. I designed this specifically because of my…
New (July 2026) : Reworked the sliders to fit and slide more smoothly. ------------------------------ This is a headband, inspired by Sennheiser PX100, can be folded and size adjusted. It's designed primarily for KSC75 but can be used…
Other designs didn't really fit the bill. One limited the tilt of the driver, the other seems very bulky. I designed this myself in Fusion and it seems to work perfectly. I regained the tilt and it covers the solder area of the driver…
This is a remix of fortinmike's remix to allow the headphones to mount the BoboVR M2 and M2 Pro halo straps. Unlike other designs, this headphone mount attaches to the headset by replacing the centre circular cap at the pivot point of the…
Yaxi S-Cushion: https://www.amazon.com/gp/product/B089SST2YM/ Geekria Pads: https://www.amazon.com/gp/product/B0155XZJ4I/ Installation is as easy as pressing the KSC into place but does require a headband as the ear clips will not fit…
SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates Provided a left and right file. Printed in PLA due to short term usage. If long term consider UV stable filaments like ASA. Setting used. 0.2mm layer height, 10% infill, 4…
The SC743 case unfortunately uses non standard mounting holes for the ATX power supply. The Supermicro original power supplies have screws on the top and right side of the case and none of the standard ATX holes. So mounting a standard…
I got requests to made a 0.78mm version of the same design, so here you go. It's tested and works well. Check out this flower grill: Make I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design…
For Pico 4 vr headset- edit, also fit Pico 4 Ultra Simple to print and simple to mount lightweight solution for koss porta pro and koss ksc75 headphones onto the Pico 4 or Pico 4 Ultra Total weight with speakers and all the wire 40 grams!…
A remix of the rugged box to carry my KSC75's in a bag.
This hot-swap drive tray fits the Supermicro SC743 chassis, and is a replacement for part MCP-220-00092-0B. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 How I Designed…
I couldn't find anything that I liked and wanted to make something that is easy to slip in and out. The Koss KSC75 ear clips slide into the center and the cable wraps around and locks in place. No infill and supports needed. 2 walls on a…
A full fan-wall replacement for Supermicro's SC743 SuperChassis; should also work in SC742, SC745, SC748 and other 4U models of this family. Fully reversibly replaces the factory sheet-metal fan wall without any need for chassis…
This is a very simple and robust mount to fit a pair of KOSS KSC75 directly onto the side of the Meta Quest 3. Made to be 3d-printed easily and quickly using only about 22g of PLA in total. The main “Mount” parts just fit onto the side…
After getting a Dremel EZ SpeedClic Assortment Box (SC725), I was surprised to see how much space is wasted in that box. All parts are presented in plastic molds that push the content up and leave vast amounts of unused and inaccessible…
If you manage to get your hands on a pair of Jivo SnapCap headphones (I got the One Direction edition), this adapter will allow you to replace the terrible drivers with Koss KSC75s. Throw some Yaxi Pads on too and it becomes a really nice…
I just got a server using the Supermicro SC747 chassis, but the fans are so loud, and there's quieter alternative unlike others models. I bought some Noctua NF-A9 in hope to use the same hot swappable bracket from the existing fans, but…
This hot-swap drive tray fits the Supermicro SC743 chassis
Measured my release lever because a bunch of others I know have had theirs break recently. I printed replacements for them, and they are quite robust with standard PETG. Make sure you print it on its side, it loses almost all of its…
I have printed a can for my KOSS KSC75. This box is a remix of the following model: https://www.printables.com/de/model/908682-customizable-silica-gel-container-vase-mode-with-f I designed this coil to keep the cable organized. Now…
PETG prints can be done at 100%, but fit is very tight. PLA definitely needs more than 100%. I'd guess around 101-102% should be fine.
This is a remix of Sev's excellent Zebralight SC700 bezel protector . Couldn't find any diffusers on the market designed specifically for the SC700d so went ahead and designed this very simple one using Sev's bezel protector as a base via…
Simple 92mm fan bracket for additional cooling of PCIe cards. Designed to fit in Supermicro's SC743 SuperChassis, should also work in SC742, SC745, SC748 and other 4U models of this family. Covers bottom 4 slots and fits over half-height…
The ADATA SC750 SSD is an easy way to add space to your Mac mini M4. And I made a bracket to hold the SC750 nicely.
Just trying to solve a problem here. Maybe someone else has a use of it. Both internal and external support. Works like a charm. Only downside is, you can't use the plastic top on the chassis.
This upgraded SC7 body post design is built to be virtually indestructible. By reinforcing the post with a through-bolt and replacing traditional body clips with a robust screw-on nut, it can handle the hardest tumbles without snapping or…
Hooks into the strap mod found at https://www.thingiverse.com/thing:6414143 Uses M2x6 screws and nuts to attach to the mount Different versions of the top and bottom mount are included, "WithCenter" means that the center circle bit was…
2 parts only easy to glue easy to print
Just a spacer to get the original further out to fit with other Grips like Dominos in my case.
You can just print the arm which is compatible with the Koss KSC75 and use it with the part this is remixed from. You can also try the clip included which I adjusted to fit my head (and the oculus band) better for me. Category: Toy & Game…
Printed with TPU 5% Infill and 0,15mm For easier fit in, just put some non agressive oil on it like "Ballistol"
This is a slight modification of Blackrat's design where the ball socket and mounts are separated, to allow for semi-flexible printing of the mount/bracket part. Note that you'll have to print the original headphone holder and ball parts:…
I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…
Replacement body posts for the RC10SC7, replacing part #71230 . The original posts often break at the hole just above the mounting screw during a crash. I made these in two parts (A and B) that you glue together Glue parts A and B…
DireBynamics mod aka non-Kossher This model was created to replace broken Dt770 PRO drivers that cost a fortune with Koss KSC75 drivers. After clicking in the koss KSC75 - the whole construction can drop into the DT770 PRO cup. The Baffle…
The front bumper brace (part of the #71231 set) functions as a spring to absorb front-end impacts. Instead of buying the whole expensive bumper kit when only this piece breaks, you can now print a quick replacement. Both options have been…
This hot-swap drive tray fits the Supermicro SC743 chassis
New (July 2026) : Reworked the sliders to fit and slide more smoothly. ------------------------------ This is a headband, inspired by Sennheiser PX100, can be folded and size adjusted. It's designed primarily for KSC75 but can be used…
Replacement body posts for the RC10SC7, replacing part #71230 . The original posts often break at the hole just above the mounting screw during a crash. I made these in two parts (A and B) that you glue together Glue parts A and B…
I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…
Measured my release lever because a bunch of others I know have had theirs break recently. I printed replacements for them, and they are quite robust with standard PETG. Make sure you print it on its side, it loses almost all of its…
![[MMCX] Improved Koss KSC75 MMCX mod](https://media.printables.com/media/prints/69e46b2b-e1eb-40ae-9e22-379bf2e74f6e/images/12578853_2e9f5ee6-fe8c-4dc7-bd93-babc4ec3e03c_948f08cd-5a44-46bb-b65c-3639b9c6ffd4/pxl_20260408_103300559.jpg)
![[2-PIN] Improved Koss KSC75 2-PIN mod](https://media.printables.com/media/prints/7c5e8aaf-03c0-4e78-9ec3-4660cd149193/images/12857778_a0ae66dc-9fff-451f-832f-40b84bfd7ee3_0a8be31d-eb65-452f-bec8-bb1fae60cfcf/pxl_20260507_050824097.jpg)
![KOSS KSC75 Mount for Meta Quest 3 [Parametric]](https://media.printables.com/media/prints/915612/images/6992485_b6e60ffd-5eb2-45e8-a3f2-14f7067214f8_01b6ae11-af24-4303-87d8-09498f6ff2a7/20240617_210112.jpg)
