RC10SC7 Front Bumper Brace (Part #71231)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement front bumper brace for RC10SC7
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The front bumper brace (part of the #71231 set) functions as a spring to absorb front-end impacts. Instead of buying the whole expensive bumper kit when only this piece breaks, you can now print a quick replacement.
Both options have been fully tested and verified to work on the track.
SC7_71231 Front Bumper Brace_2.4mm.stl – Matches the original factory brace closely in terms of flexibility and durability.
SC7_71231 Front Bumper Brace_3.2mm.stl – Tough version for less flex.
To ensure the brace functions correctly as a spring and doesn't snap, the curved loop section must consist entirely of continuous perimeters (no infill or gap fill inside the wall).
Assuming a standard 0.4mm nozzle, use the following settings:
Material: PETG (Highly recommended for impact resistance and flex).
For the 2.4mm version: Set perimeters to 3.
For the 3.2mm version: Set perimeters to 4.