RC10SC7 Front Bumper Brace (Part #71231)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement front bumper brace for RC10SC7
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The front bumper brace (part of the #71231 set) functions as a spring to absorb front-end impacts. Instead of buying the whole expensive bumper kit when only this piece breaks, you can now print a quick replacement.
Both options have been fully tested and verified to work on the track.
SC7_71231 Front Bumper Brace_2.4mm.stl – Matches the original factory brace closely in terms of flexibility and durability.
SC7_71231 Front Bumper Brace_3.2mm.stl – Tough version for less flex.
To ensure the brace functions correctly as a spring and doesn't snap, the curved loop section must consist entirely of continuous perimeters (no infill or gap fill inside the wall).
Assuming a standard 0.4mm nozzle, use the following settings:
Material: PETG (Highly recommended for impact resistance and flex).
For the 2.4mm version: Set perimeters to 3.
For the 3.2mm version: Set perimeters to 4.
