Search results: sc7

Counting matching models…

PrintablesSev

Zebralight SC700 Protector

PETG prints can be done at 100%, but fit is very tight. PLA definitely needs more than 100%. I'd guess around 101-102% should be fine.

Downloads: 24
Likes: 3
Rating: 0

Order a print of this model

PrintablesCapra-Audio

(NOW with added "EZ Print" STL to print as one part) This isn't the first design for an MMCX connector to be added to KSC75, but this is the best design for an MMCX connector for the KSC75. I designed this specifically because of my…

Downloads: 241
Likes: 35
Rating: 5

Order a print of this model

PrintablesDavlumbaz

Foldable Headband for Koss KSC75 & Travel Case

New (July 2026) : Reworked the sliders to fit and slide more smoothly. ------------------------------ This is a headband, inspired by Sennheiser PX100, can be folded and size adjusted. It's designed primarily for KSC75 but can be used…

Downloads: 186
Likes: 27
Rating: 5

Order a print of this model

PrintablesDWO

Quest 2 Koss KSC75/PortaPro Headphone Mount for BoboVR M2/M2 Pro

This is a remix of fortinmike's remix to allow the headphones to mount the BoboVR M2 and M2 Pro halo straps. Unlike other designs, this headphone mount attaches to the headset by replacing the centre circular cap at the pivot point of the…

Downloads: 157
Likes: 16
Rating: 0

Order a print of this model

PrintablesEvelien

[MMCX] Improved Koss KSC75 MMCX mod

Other designs didn't really fit the bill. One limited the tilt of the driver, the other seems very bulky. I designed this myself in Fusion and it seems to work perfectly. I regained the tilt and it covers the solder area of the driver…

Downloads: 156
Likes: 17
Rating: 5

Order a print of this model

PrintablesCapra-Audio

KSC75 CUSH MOD

Yaxi S-Cushion: https://www.amazon.com/gp/product/B089SST2YM/ Geekria Pads: https://www.amazon.com/gp/product/B0155XZJ4I/ Installation is as easy as pressing the KSC into place but does require a headband as the ear clips will not fit…

Downloads: 150
Likes: 14
Rating: 0

Order a print of this model

Printablesdl_unlimited

SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates

SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates Provided a left and right file. Printed in PLA due to short term usage. If long term consider UV stable filaments like ASA. Setting used. 0.2mm layer height, 10% infill, 4…

Downloads: 139
Likes: 4
Rating: 0

Order a print of this model

PrintablesTobbe

ATX Adapter for SC743

The SC743 case unfortunately uses non standard mounting holes for the ATX power supply. The Supermicro original power supplies have screws on the top and right side of the case and none of the standard ATX holes. So mounting a standard…

Downloads: 115
Likes: 10
Rating: 0

Order a print of this model

PrintablesEvelien

[2-PIN] Improved Koss KSC75 2-PIN mod

I got requests to made a 0.78mm version of the same design, so here you go. It's tested and works well. Check out this flower grill: Make I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design…

Downloads: 100
Likes: 12
Rating: 5

Order a print of this model

PrintablesGmoLargey

Pico 4 & Pico 4 Ultra Koss porta pro/Ksc75 simple mounts.

For Pico 4 vr headset- edit, also fit Pico 4 Ultra Simple to print and simple to mount lightweight solution for koss porta pro and koss ksc75 headphones onto the Pico 4 or Pico 4 Ultra Total weight with speakers and all the wire 40 grams!…

Downloads: 74
Likes: 6
Rating: 0

Order a print of this model

PrintablesBrinton Sloughfy

Rugged Box - Koss KSC75

A remix of the rugged box to carry my KSC75's in a bag.

Downloads: 73
Likes: 10
Rating: 3

Order a print of this model

Printableskg333

Supermicro SC743 Drive Tray

This hot-swap drive tray fits the Supermicro SC743 chassis, and is a replacement for part MCP-220-00092-0B. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 How I Designed…

Downloads: 73
Likes: 8
Rating: 0

Order a print of this model

PrintablesFBRNR3D

KOSS KSC75 HOLDER

I couldn't find anything that I liked and wanted to make something that is easy to slip in and out. The Koss KSC75 ear clips slide into the center and the cable wraps around and locks in place. No infill and supports needed. 2 walls on a…

Downloads: 68
Likes: 10
Rating: 0

Order a print of this model

PrintablesMJBogusz

120mm fan wall for Supermicro SC74X 4U chassis

A full fan-wall replacement for Supermicro's SC743 SuperChassis; should also work in SC742, SC745, SC748 and other 4U models of this family. Fully reversibly replaces the factory sheet-metal fan wall without any need for chassis…

Downloads: 65
Likes: 10
Rating: 0

Order a print of this model

PrintablesWaschtl

KOSS KSC75 Mount for Meta Quest 3 [Parametric]

This is a very simple and robust mount to fit a pair of KOSS KSC75 directly onto the side of the Meta Quest 3. Made to be 3d-printed easily and quickly using only about 22g of PLA in total. The main “Mount” parts just fit onto the side…

Downloads: 64
Likes: 10
Rating: 0

Order a print of this model

Printablesreibuehl

Inserts for Dremel EZ SpeedClic Box (SC725)

After getting a Dremel EZ SpeedClic Assortment Box (SC725), I was surprised to see how much space is wasted in that box. All parts are presented in plastic molds that push the content up and leave vast amounts of unused and inaccessible…

Downloads: 49
Likes: 12
Rating: 0

Order a print of this model

PrintablesEddieCoast

Koss KSC75 - Jivo SnapCap Adapter

If you manage to get your hands on a pair of Jivo SnapCap headphones (I got the One Direction edition), this adapter will allow you to replace the terrible drivers with Koss KSC75s. Throw some Yaxi Pads on too and it becomes a really nice…

Downloads: 46
Likes: 6
Rating: 0

Order a print of this model

Printablesdwild

Fan bracket for Supermicro SC747

I just got a server using the Supermicro SC747 chassis, but the fans are so loud, and there's quieter alternative unlike others models. I bought some Noctua NF-A9 in hope to use the same hot swappable bracket from the existing fans, but…

Downloads: 38
Likes: 7
Rating: 0

Order a print of this model

PrintablesARDev1161

Supermicro SC743 Drive Tray for 2.5" disks

This hot-swap drive tray fits the Supermicro SC743 chassis

Downloads: 36
Likes: 5
Rating: 0

Order a print of this model

PrintablesMichael Brennan

Trimble TSC7 Bracket Release Lever

Measured my release lever because a bunch of others I know have had theirs break recently. I printed replacements for them, and they are quite robust with standard PETG. Make sure you print it on its side, it loses almost all of its…

Downloads: 31
Likes: 2
Rating: 0

Order a print of this model

PrintablesTobias

Ear Phone cable spool KOSS KSC75

I have printed a can for my KOSS KSC75. This box is a remix of the following model: https://www.printables.com/de/model/908682-customizable-silica-gel-container-vase-mode-with-f I designed this coil to keep the cable organized. Now…

Downloads: 30
Likes: 2
Rating: 0

Order a print of this model

PrintablesCJ

Zebralight SC700d flashlight cone diffuser

This is a remix of Sev's excellent Zebralight SC700 bezel protector . Couldn't find any diffusers on the market designed specifically for the SC700d so went ahead and designed this very simple one using Sev's bezel protector as a base via…

Downloads: 22
Likes: 2
Rating: 0

Order a print of this model

PrintablesMJBogusz

PCIe card fan bracket for Supermicro SC74X 4U chassis

Simple 92mm fan bracket for additional cooling of PCIe cards. Designed to fit in Supermicro's SC743 SuperChassis, should also work in SC742, SC745, SC748 and other 4U models of this family. Covers bottom 4 slots and fits over half-height…

Downloads: 18
Likes: 6
Rating: 0

Order a print of this model

PrintablesUca

ADATA SC750 ssd mount for Mac mini M4

The ADATA SC750 SSD is an easy way to add space to your Mac mini M4. And I made a bracket to hold the SC750 nicely.

Downloads: 17
Likes: 5
Rating: 0

Order a print of this model

PrintablesZolektric

SC743 PSU Support

Just trying to solve a problem here. Maybe someone else has a use of it. Both internal and external support. Works like a charm. Only downside is, you can't use the plastic top on the chassis.

Downloads: 17
Likes: 3
Rating: 0

Order a print of this model

PrintablesNarvakaali

RC10SC7 Indestructible Body Posts (Screw-On Design)

This upgraded SC7 body post design is built to be virtually indestructible. By reinforcing the post with a through-bolt and replacing traditional body clips with a robust screw-on nut, it can handle the hardest tumbles without snapping or…

Downloads: 16
Likes: 1
Rating: 0

Order a print of this model

PrintablesLonnyK

Bigscreen Beyond Soft Strap KSC75 Mount

Hooks into the strap mod found at https://www.thingiverse.com/thing:6414143 Uses M2x6 screws and nuts to attach to the mount Different versions of the top and bottom mount are included, "WithCenter" means that the center circle bit was…

Downloads: 14
Likes: 3
Rating: 0

Order a print of this model

Printablesaadfg dsadg

120mm fan wall for Supermicro SC74X 4U chassis

2 parts only easy to glue easy to print

Downloads: 13
Likes: 2
Rating: 0

Order a print of this model

PrintablesBananenKaiser

Honda handlebar weights/ends Spacer | CBR 1000 RR SP1 SC77 (2017)

Just a spacer to get the original further out to fit with other Grips like Dominos in my case.

Downloads: 12
Likes: 2
Rating: 0

Order a print of this model

PrintablesTailslide

Koss KSC75 arms for oculus Rift S

You can just print the arm which is compatible with the Koss KSC75 and use it with the part this is remixed from. You can also try the clip included which I adjusted to fit my head (and the oculus band) better for me. Category: Toy & Game…

Downloads: 11
Likes: 0
Rating: 0

Order a print of this model

PrintablesBananenKaiser

CBR 1000 SC77 Windscreen rubbers

Printed with TPU 5% Infill and 0,15mm For easier fit in, just put some non agressive oil on it like "Ballistol"

Downloads: 10
Likes: 2
Rating: 0

Order a print of this model

Printableszeiphon

Koss KSC75 flexible mounts for Oculus Rift S

This is a slight modification of Blackrat's design where the ball socket and mounts are separated, to allow for semi-flexible printing of the mount/bracket part. Note that you'll have to print the original headphone holder and ball parts:…

Downloads: 10
Likes: 3
Rating: 0

Order a print of this model

PrintablesNarvakaali

Team Associated RC10SC7 Battery Tray (for Standard Size LiPos)

I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…

Downloads: 9
Likes: 1
Rating: 0

Order a print of this model

PrintablesNarvakaali

RC10SC7 71230 Body post

Replacement body posts for the RC10SC7, replacing part #71230 . The original posts often break at the hole just above the mounting screw during a crash. I made these in two parts (A and B) that you glue together Glue parts A and B…

Downloads: 5
Likes: 2
Rating: 0

Order a print of this model

PrintablesDamnDan

Koss KSC75 driver baffle for DT770 PRO

DireBynamics mod aka non-Kossher This model was created to replace broken Dt770 PRO drivers that cost a fortune with Koss KSC75 drivers. After clicking in the koss KSC75 - the whole construction can drop into the DT770 PRO cup. The Baffle…

Downloads: 4
Likes: 0
Rating: 0

Order a print of this model

PrintablesNarvakaali

RC10SC7 Front Bumper Brace (Part #71231)

The front bumper brace (part of the #71231 set) functions as a spring to absorb front-end impacts. Instead of buying the whole expensive bumper kit when only this piece breaks, you can now print a quick replacement. Both options have been…

Downloads: 4
Likes: 0
Rating: 0

Order a print of this model

Printables

Supermicro SC743 Drive Tray for 2.5" disks

This hot-swap drive tray fits the Supermicro SC743 chassis

Order a print of this model

Printables