RC10SC7 Indestructible Body Posts (Screw-On Design)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy-duty body posts for Team Associated RC10SC7. Reinforced with M4 bolts. Screw-on nuts, no body clips!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This upgraded SC7 body post design is built to be virtually indestructible. By reinforcing the post with a through-bolt and replacing traditional body clips with a robust screw-on nut, it can handle the hardest tumbles without snapping or losing clips.
Print 2x of all files, except:
Body post nut.stl Print 4x
body post_pos+1_spacer.stl Print as many as needed for your desired height.
Without any spacers, the posts sit at the second-lowest original position (Position 2). Adding one spacer equals one step higher in the original body post positioning.
Also needed
4pcs M4 bolts/screws
Length: M4x40mm is the perfect length if you are using either no spacers or just one spacer. If you use more spacers, you will need correspondingly longer bolts.
The printed threads on the parts are designed to be tight. I highly recommend cleaning them up with an M4 thread tap after printing to ensure the nuts spin smoothly.
Recommended material: PETG