Prusa i3 MK3 / MK3S Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a camera mount for the Prusa i3 MK3 and MK3S. It will hold your camera on the body of your printer.
- Ocena
- 4,871 / 5
- Polubienia
- 220
- Pobrania
- 1416
- Wydruki
- 31
- Wyświetlenia
- 8200
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a camera mount for the Prusa i3 MK3 and MK3S.
It will hold your camera on the body of your printer.
I add also a screw, to attach your camera with standard-thread on the mount.
IMPORTANT:
If you use the screw, be sure to print it with 100% infill and don't tighten it to strong - otherwise it may break and you'll have problems to get it out of your camera...
Works fine with standard Logitech "Printer Cam" :) ...and other similar and lightweight cams.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 25%
Filament: extrudr Greentec black
Notes:
25% Infill
0.2mm layer for the mount
100% Infill
0.15mm layer for the screw (0.2mm will do it as well)