Prusa i3 MK3 / MK3S Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a camera mount for the Prusa i3 MK3 and MK3S. It will hold your camera on the body of your printer.
- Rating
- 4.871 / 5
- Likes
- 220
- Downloads
- 1,416
- Makes
- 31
- Views
- 8,200
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a camera mount for the Prusa i3 MK3 and MK3S.
It will hold your camera on the body of your printer.
I add also a screw, to attach your camera with standard-thread on the mount.
IMPORTANT:
If you use the screw, be sure to print it with 100% infill and don't tighten it to strong - otherwise it may break and you'll have problems to get it out of your camera...
Works fine with standard Logitech "Printer Cam" :) ...and other similar and lightweight cams.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 25%
Filament: extrudr Greentec black
Notes:
25% Infill
0.2mm layer for the mount
100% Infill
0.15mm layer for the screw (0.2mm will do it as well)