Ellipsoid Lamp Shade for E27 Pendant Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elegant 382 mm lamp shade for E27 pendant lights. Prints on a 200×200 mm printer with no supports.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 327
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Create a large designer lamp shade without needing a large 3D printer.
This lamp shade has a diameter of 382 mm, but every printable part fits on a standard 200 × 200 mm build plate.
The design consists of:
12 identical petals
Top twist-lock ring
Bottom cap
Assembly is completely glue-free. Simply insert all petals one into another, install the top locking ring, and twist it to lock everything in place. Then plug the bottom cap.
Features
✓ Large 382 mm diameter
✓ Fits 200 × 200 mm printers
✓ No supports required
✓ Brim recommended
✓ Glue-free assembly
✓ Standard E27 pendant light
✓ Compatible with 40 mm shade rings
✓ Tested with IKEA HAVSDJUP pendant
Printing
Material:
White PLA/PETG/ABS/...
Transparent PLA/PETG/ABS/...
Supports:
Not required
Brim:
Recommended
The translucent petals create a soft and pleasant light while the structural ribs remain visible, giving the lamp a modern organic appearance.
Compatibility
Designed for standard E27 pendant light fittings using a 40 mm shade ring.
Tested with IKEA HAVSDJUP, but should work with any compatible E27 pendant using the same standard shade ring.