OsVAC adapter for OptigrindTS305
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OsVAC adapter for the disc sander OptigrindTS305
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
The idea behind OsVac was founded at: https://www.thingiverse.com/Hobbyhimmel/designs
Their explanation about the project:
If you are also tired of matching tools with different vacuum outlets to your shop-vacuum and don't like to use tape for all different adapters, this might be the right choice to switch all your setup to one standard open source adapter - the osVAC Adapter!
The OsVac universal vacuum cleaner adapter system was created to facilitate the dust problem with woodcraft machines. Basically its based on a bayonet lock between vacuum hose and the air outlet nozzle of each of your machines.
I have severeal OsVac adapters for my different machines. In contrast to many other machines I couldn't find an existing OsVac adapter for my new disc sander, a Optigrind TS-305. So I created this one with my favorite CAD-System OnShape. I printed it on my MK4S with PETG because of the relative small wall thickness at the ground of the adapter. (The first one printed in PLA broke at the transition: ground-cylinder albeit there is already a fillet)