E810-XXVDA4 low profile fan shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan shroud designed for a low profile e810-XXVDA4. Uses a 5015 blower fan.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 1
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A fan shroud designed for a low profile e810-XXVDA4. Uses a 5015 blower fan.
Updated: thinner, should be able to fit next to another card now.
Print both parts. The body may need supports for the channel on the lower half ( it will be difficult to remove the supports ). Assemble the fan section, use 20mm M4 countersunk screws to secure the lid( friction fit, no nuts or inserts needed ). Then just slide the card into the shroud. Be sure to have the edge of the metal guard near the PCIe fingers in the channel. The back of the card should touch the lid, the hole on the body and the card should line up. The hole is M3, you could use a screw but I just ended up using a zip tie to secure the shroud.