1 / 5
Mercruiser 3000/4000 Commander Gen1 to Gen 2 cable adapter. — zdjęcie 1
1 / 5

Mercruiser 3000/4000 Commander Gen1 to Gen 2 cable adapter.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mercruiser 3000/4000 Commander Gen1 to Gen 2 cable adapter.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I had confusion with which model throttle and shit controller I had at my boat helm. I thought my boat was equipped with the 4000 series commander that used Gen II cables. It turned out it was an older version of the 4000 series commander that utilized Gen I cables.

It was quicker for me to get my boat back on the water making this part then returning and waiting for Gen 1 cables to be delivered. This worked for my particular application.

This has been tested to work with UFX-C36X## Control cable for Merc Gen II. The UFX-C36X had a slightly  shorter throw, but it still worked for  my setup. 2001 Mercriuser 4.3l EFI with Alpha One Gen 2 outdrive.

I printed these upside down with raft so that the internal dimensions would be accurate and properly fit around the Gen II cables.

4 layers of raft support

Auto Normal Snug supports

7 walls

50% infill

Adaptive layers to smooth out the curves.

You can either attempt to glue the pieces together around the Gen II cable. Or there is a spot for a zip tie, and the other end will be pressed together when inserted into the controller. I used the zip tie method.

Tagi