Mercruiser 3000/4000 Commander Gen1 to Gen 2 cable adapter.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mercruiser 3000/4000 Commander Gen1 to Gen 2 cable adapter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had confusion with which model throttle and shit controller I had at my boat helm. I thought my boat was equipped with the 4000 series commander that used Gen II cables. It turned out it was an older version of the 4000 series commander that utilized Gen I cables.
It was quicker for me to get my boat back on the water making this part then returning and waiting for Gen 1 cables to be delivered. This worked for my particular application.
This has been tested to work with UFX-C36X## Control cable for Merc Gen II. The UFX-C36X had a slightly shorter throw, but it still worked for my setup. 2001 Mercriuser 4.3l EFI with Alpha One Gen 2 outdrive.
I printed these upside down with raft so that the internal dimensions would be accurate and properly fit around the Gen II cables.
4 layers of raft support
Auto Normal Snug supports
7 walls
50% infill
Adaptive layers to smooth out the curves.
You can either attempt to glue the pieces together around the Gen II cable. Or there is a spot for a zip tie, and the other end will be pressed together when inserted into the controller. I used the zip tie method.