1 / 4
Ikea Skådis big screwdriver holder, honeycomb pattern / Velký držák na šroubováky pro Skadis — zdjęcie 1
1 / 4

Ikea Skådis big screwdriver holder, honeycomb pattern / Velký držák na šroubováky pro Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screwdriver holder to fit Ikea Skadis with locking hook

Ocena
5 / 5
Polubienia
119
Pobrania
347
Wydruki
4
Wyświetlenia
1369
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

Remix

I really liked @Jirka_4226633's model Big screwdriver holder, honeycomb pattern (Děkuju) but I wanted to put it on my IKEA SKÅDIS wall. 

If you like this model please also like the original as Jirka did most of the work.

This attaches to Ikea Skadis easily and securely.

 If you have any questions or suggestions let me know!

Original four hook version.

Four may be unnecessary for some people, especially with PETG so I made a two hook version as well.

I spent 99% of the time testing different hook designs as I was not happy with the previous ones I found on Printables. 

I will probably put this out as a seperate model

The hook locks into place and prevents movement in all axis except upwards with some resistance. 

Support are mandatory for the lower hook, but also useful for the top to ensure a smooth fit

I recommend an outer brim for PETG/ABS, I had some warping when I printed mine in PETG the first time

Print Settings

I had issues the first time I printed this model with PETG lifting off the plate, the supports coming free, which is why I switched to 0.4mm nozzle for PETG and added a brim. PLA is more flexible what print settings you use.

  • Filament: I think this could be printed in most filaments, not just PETG/ASA. 

  • Nozzle: Recommend 0.4mm for predictable results with the hook
    (in v1.0 when I printed with a 0.6mm nozzle the hooks were too wide, i have updated the model to be 0.2mm thinner so in theory it should be fine now in 0.6mm but untested)

  • Profile: Structural or Balanced

  • Perimeters: 3

  • Infill: 15%

  • Supports: Required

I may make a longer version as I have a lot of Wera screw drivers.

Tagi