2020-2026 Volkswagen ID.4 Car Hatchback Strap Mount Adapter Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement to go over the existing broken strap mount that holds the strap for the hatch cover.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I purchased my 2023 Volkswagen ID.4 and it came already with a broken strap mount. I designed this adapter piece to slide over it and then glued it on. I printed it at 0.2mm layer height in TPU solid and glued it on with superglue (cyanoacrylate glue). I thought it might be better to use TPU as it would flex instead of snapping but you could try another filament.
I also think using the fuzzy skin would make the exterior texture match the original (see 2nd photo). Only thought of it after I made it though.
I have attached the original editable .sldprt file so if you'd like to edit this yourself for your own needs you can open it in SolidWorks. I also attached a .step and .stl file.