Wall-Mount Hanging Insert for Glass Vases and Similar Items
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printable insert for securely hanging glass vases and similar items on a wall while reducing stress on the glass.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Wall-Mount Hanging Insert for Glass Vases and Similar Items
A 3D-printable wall-mount insert for hanging glass vases and similar objects. The collar helps distribute the load through the printed part instead of concentrating it directly on the glass.
A minimum of 20% infill is recommended. PLA and PETG are suitable for lightweight objects. Do not overtighten the mounting screw, as excessive force may damage the printed part. Normal tightening is sufficient.
The optional cap is not required for installation.
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7383116
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
Share — copy and redistribute the model in any medium or format
Adapt — remix, transform, and build upon the model
Use commercially
Under the following terms:
Attribution — You must give appropriate credit to the original author
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.