1 / 6
Can/Mug Holder for Nammaro chair with armrests — zdjęcie 1
1 / 6

Can/Mug Holder for Nammaro chair with armrests

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can and Mug Holders for outdoor NÄMMARÖ chair with armrests

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Can and Mug Holders for outdoor NÄMMARÖ chair with armrests.

I recommend .2mm layer, 3 walls, 15% infill, ABS or ASA (since it will be outdoor). I printed it on the the corner, but you might try the other way.

It works even without cap, but for better rigidity cap is recommended. To install it you will need M2 x 2mm inserts, M2 x 4mm bolts.

If you want to use the can/mug holder on another armrest, you can mirror it right in slicer.

If you want to adjust something, you can find the sources here: onshape.com

Tagi