Parametric FX3/FX30/FX2 XLR-H1 Mic Adapter (19mm STL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter enables the use of a microphone of a smaller diameter than that of the XLR-H1 handle for the FX3/FX30/FX2.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Open Community License v1.1 + General Attribution v1
The included STEP and 3MF file is designed to work with 19mm microphones like the NTG5. The included fusion file is parametric, so if you wish to use a microphone of a different size, simply open the f3d file and change the micDiameter parameter to the diameter of your microphone.
If you are new to fusion or haven't used parameters before, you can easily change it by expanding the modify menu, then by clicking the 'Change Parameters' button. If you don't have access to fusion, one can sign up for free for noncommercial use. Alternatively, modify the included STEP file or pester me by sending an email to [email protected] (please note that I may take a while to respond).
I recommend printing this part in TPU to prevent scratching the mic and to improve grip. However, other materials will likely work fine; I ended up printing mine in ASA as I didn't have any TPU on hand. I would avoid using PLA as it is quite brittle, particularly for mics with a greater diameter.