Internal Organizer Insert Compatible with Master Lock Key Lock Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printable organizer insert compatible with Master Lock key lock boxes, available in two heights.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Internal Organizer Insert Compatible with Master Lock Key Lock Box
This 3D-printable insert helps keep keys upright and securely contained inside the lock box. It is compatible with Master Lock key lock boxes.
Four versions are included. Dimensions are listed as width × depth × height:
Slotted version: 62 × 21 × 25 mm (approximately 2.4 × 0.8 × 1 in)
Low version: 62 × 21 × 25 mm (approximately 2.4 × 0.8 × 1 in)
High version: 62 × 21 × 35 mm (approximately 2.4 × 0.8 × 1.4 in)
Max Space Version: 62 × 21 × 25 mm (approximately 2.4 × 0.8 × 1 in)
The screw hole diameter is 5 mm (approximately 0.2 in) in all versions.. Check the internal dimensions of your lock box before printing, as dimensions may vary between different models.
Recommended Print Settings
Infill: 20 %
Materials: PETG or a stronger material, such as PC or ABS, for improved strength and durability. The models shown in the photos were printed in PETG.
The STL files can be printed in their default orientation as loaded.
Supports: Recommended
Disclaimer
This is an independent 3D printable accessory and is not affiliated with, endorsed by, or sponsored by Master Lock.
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7383923
Updates & Changelog
17/07/26: Added a slotted version of the model.
21/07/26: Added a max-version of the model.
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
Share — copy and redistribute the model in any medium or format
Adapt — remix, transform, and build upon the model
Use commercially
Under the following terms:
Attribution — You must give appropriate credit to the original author
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.