Rookie, inspired by Rook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a moded rook capable of 20000mm/s² _ 400mm/s
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Rookie, a moded rook 2020 mk2.
it was designed around the ender2 165x165 heatbed. (you can put a baumbu-mini plate, 180x180)
Z linear rails are mgn12H, X is mgn12C, Y are mgn9C (not working with V-slot, you need T-slot profiles or make you own custom mgn9 suports for v-slot)).
There is a modified carriage for ant head, with more room for wires.
Two carbon fiber tubes on X axis for rigidity and lightweight.
I use LDO nema17 48mm motors, works great.
For advanced makers, not all the screws are in the step file, and the frame need to be very accurately assembled.
Time needed to fine tune this little printer (I use Shake n' tune) https://github.com/Frix-x/klippain-shaketune
feel free to mod it, thanks to upload your mods ;)