Rookie, inspired by Rook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a moded rook capable of 20000mm/s² _ 400mm/s
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Rookie, a moded rook 2020 mk2.
it was designed around the ender2 165x165 heatbed. (you can put a baumbu-mini plate, 180x180)
Z linear rails are mgn12H, X is mgn12C, Y are mgn9C (not working with V-slot, you need T-slot profiles or make you own custom mgn9 suports for v-slot)).
There is a modified carriage for ant head, with more room for wires.
Two carbon fiber tubes on X axis for rigidity and lightweight.
I use LDO nema17 48mm motors, works great.
For advanced makers, not all the screws are in the step file, and the frame need to be very accurately assembled.
Time needed to fine tune this little printer (I use Shake n' tune) https://github.com/Frix-x/klippain-shaketune
feel free to mod it, thanks to upload your mods ;)