6-Inch 3U Rack Side Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective side panel for a 6-inch 3U rack, designed to enclose the frame while retaining ventilation.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A ventilated side panel designed for my 6-inch 3U rack configuration. Pictures are with printed TPU vent hole blockers meant for active fan ventilation.
The panel encloses and protects the side of the rack while allowing airflow through the ventilation openings.
Printing recommendations
Material: PLA or PETG
PETG is recommended for racks installed in warmer environments
Print orientation: place the largest flat face on the build plate
Supports: not expected to be required when printed flat
Verify that the model fits within your printer’s available build area before slicing.
Attribution
This is my original design for the 6-inch rackmount ecosystem originally developed and popularized by Maurício Pessoa (@Mauker).
Mauker’s 6-inch rack designs were the original inspiration for this project: