Gaggia Classic E24 Pump Noise & Vibrations Reducer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With correct print orientation it's a perfect bumper for the stock or Lelit upgrade pump.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Top:
I printed with 3 walls and whatever % infill.
Bottom:
10-20% Gyroid Infill no Wall, Top or Bot makes for a nice squishy bracket.
I Printed in TPC for higher Tg and 10% infill (could be lower) because TPC is quite stiff. TPE or TPU should do fine, but do put a comment in if not.
Print orientation is important!
As the additional fittings, from the gaggiamate mod, on top of my pump dragged it down and bottomed out the original mount i had to replace it, with something more silent and stiff.
I've installed dampning mats in the chassis, a Quickmill Pulser and a Lelit Green Pump, so results may vary. But my espresso machine now has a nice sound so that a conversation can easily be had close to it.