Gaggia Classic E24 Pump Noise & Vibrations Reducer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With correct print orientation it's a perfect bumper for the stock or Lelit upgrade pump.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Top:
I printed with 3 walls and whatever % infill.
Bottom:
10-20% Gyroid Infill no Wall, Top or Bot makes for a nice squishy bracket.
I Printed in TPC for higher Tg and 10% infill (could be lower) because TPC is quite stiff. TPE or TPU should do fine, but do put a comment in if not.
Print orientation is important!
As the additional fittings, from the gaggiamate mod, on top of my pump dragged it down and bottomed out the original mount i had to replace it, with something more silent and stiff.
I've installed dampning mats in the chassis, a Quickmill Pulser and a Lelit Green Pump, so results may vary. But my espresso machine now has a nice sound so that a conversation can easily be had close to it.