1 / 3
Door shelf/door bin for a Bauknecht refrigerator, model KGN 20C23IN — zdjęcie 1
1 / 3

Door shelf/door bin for a Bauknecht refrigerator, model KGN 20C23IN

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

19,62 € – 23,99 € netto (bez VAT)

Dla pliku: Kuehlschrankeinsatz_0.4n_0.16mm_PETG,PLA_COREONEMMU3_16h14m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 21,81 € netto (środek widełek).

Masa podana przez autora
417 g
Czas druku podany przez autora
16,23 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Door shelf/door bin for a Bauknecht refrigerator, model KGN 20C23IN (may fit other Bauknecht refrigerators (untested))

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

English version below

  • Konsole/Türeinsatz für einen Bauknecht-Kühlschrank vom Typ KGN 20C23IN

  • Könnte ggf. auch für andere (Bauknecht-)Kühlschränke passen (ungetestet)

  • Aus PETG gedruckt, weil es chemisch beständiger als PLA ist und bei bis zu 70 °C im Geschirrspüler ohne Verzug/Deformation gereinigt werden kann

  • Die Stützstrukturen sind ebenfalls aus PETG und lediglich die Schnittstellen zwischen der Konsole und den Stützstrukturen sind aus PLA

  • PETG und PLA sollten bestenfalls dieselbe Farbe haben, bspw. weiß oder transparent

  • Der Spülturm/der Abfall wird reduziert, weil das Spülen nach einem Filament-/Werkzeugwechsel als Infill in das Objekt gedruckt wird

  • Druckbar mit gewöhnlicher 0,4er-Messingdüse; keine gehärtete oder HF-Düse notwendig

  • Aufgrund des Filamentwechsels ist eine MMU3 notwendig (Extruder 1 = PETG, Extruder 2 = PLA)

English version

  • Console/Door shelf for a Bauknecht refrigerator, model KGN 20C23IN

  • Might also fit other (Bauknecht) refrigerators (untested)

  • Printed in PETG because it is more chemically resistant than PLA and can be cleaned in the dishwasher at up to 70 °C without warping or deformation

  • The support structures are also made of PETG, with only the interfaces between the console and the support structures made of PLA

  • Ideally, the PETG and PLA should be the same color, e.g., white or transparent

  • The purge tower/waste is reduced because the purge after a filament/tool change is printed into the object as infill

  • Printable with a standard 0.4 mm brass nozzle; no hardened or high-flow (HF) nozzle required

  • An MMU3 is required due to the filament changes (Extruder 1 = PETG, Extruder 2 = PLA)

Tagi