Thrust Bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All my designs & progress available @ Marginally Clever. Bearings reduce friction between moving parts. This bearing…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 2142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
All my designs & progress available @ Marginally Clever.
Bearings reduce friction between moving parts. This bearing takes greater axial load than a standard Ball Thrust Bearing. It is not recommended for applications with high radial load.
Inner diameter is 0.25"
Outer diameter is 0.63"
Height is 0.17"
Instructions
Acquire ten (10) metal 1/8" ball bearings.
Print both halves.
Place the outer ring on a flat surface
Place the ball bearings into the center.
Use a pencil to push the ball bearings into the groove on the outer ring. Some balls may be magnetized and it will take a bit of patience.
Snap the inner ring into place.
Category: Other