Fast Desiccant Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy Desiccant Holder, with louvres for great venting and fast printing in Vase mode.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Open Community License v1.1 + Micro Business v1
This sleek & sturdy desiccant holder prints fast and uses only 8 grams of material. It is optimized for spiral vase mode, with wide louvres for great venting.
Cap with a quarter turn bayonet closure and a secure snap
50 x 50 mm. size; easily drops into and out of the center of a spool
Holds 65 grams of desiccant
< 1.6 mm. vent openings, should work for regular desiccant pellets (> 2 mm. size)
43 minutes to print on a Prusa Mk4
Print Instructions
Print in Spiral Vase Mode only
tested with PLA, should work with other materials
Nozzle:
0.4 mm. with 0.7 mm extrusion width (critical for a good fit of the cap)
Or 0.6 mm with default extrusion width of 0.68 mm (in Prusaslicer)
0.2 mm. to 0.25 mm. layer height
0.6 to 0.9 mm. bottom shell thickness (default setting)
No supports or brim needed
Print both parts individually in Vase Mode; orient them with the slotted face down on the build plate
Assembly & Use
To tighten the cap, twist clockwise until it clicks.
To open the cap, twist counterclockwise.
A light squeeze on the 3 dots makes it easier to open or close if it is a bit stiff.
You can fill it to the brim with desiccant pellets.
Acknowledgements
This is an original design, with inspiration from a few other designs:
Louvres idea but lined up instead of offset, from https://www.printables.com/model/470990-filament-spool-desiccant-cylinder-v3
Lid bayonet attachment but inverted, from https://www.printables.com/model/168412-super-fast-silica-gel-desiccant-spool-container-va/comments
Using vase mode from https://www.printables.com/model/208149-improved-fast-printing-screw-top-desiccant-contain
Revision History
Version 1.0 - July 19, 2026: Initial publication
Version 1.1 - November 2, 2026:
Optimized lid interface to a clockwise quarter turn.
Added a secure lock snap.