CORE One L Exhaust Vent Flaps with Duct Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vent flaps for the CORE One L with 90 degree downward turn and 100mm outlet to adapt to a standard 4" dryer vent hose.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of the vent flaps for the CORE One L by MandicReally with 90 degree downward turn and 100mm outlet to adapt to a standard 4" dryer vent hose.
This works very nicely to allow the printer to be pushed back closer to the wall and leaves just the right amount of access to get to the power switch.
MandicReally did a great job on the original vent flaps which work perfectly and are not obstructed by the addition of the duct. The mounting holes align exactly with the threaded holes on the back of the CORE One L.
I printed at a 45 degree angle and it came out clean. Could have had better supports on the interior corners of the long sides of the mounting face but perfectly functional.