1 / 4
Fender Squier PJ bass for LEGO Minifig — zdjęcie 1
1 / 4

Fender Squier PJ bass for LEGO Minifig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Little bitty bass guitar for your LEGO minifigs based on the Squier Affinity PJ bass.

Ocena
0 / 5
Polubienia
3
Pobrania
2
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Share Alike

A miniature Fender Squier Affinity PJ bass for your lego minifigs.

Inspired by the model posted by Jona32u4, but that's an Ibanez, so here's a Fender.

Apparently "minifig scale" isn't an exact thing (shocker) but I've seen 1:32 to 1:40 - but getting the required 3mm (ish) diameter on the neck means the scale worked out to about 1:24, so it's kinda gigantic for a minifig, but since it's a bass, it looks just fine. The scale works out roughly equivalent with Jona32u4's original with the overall length at ~47mm.

Modeled by tracing a photo of the original and then very roughly recreating it. No attempt at detail since it would be completely lost in LEGO scale, but wanted to get the rough shapes right.

"Fender Squier PJ" STL is all the parts assembled together. The rest of the STLs are the individual parts. "Body edge" and "Body center" are separate pieces just in case you want to try and fake the iconic "sunburst" finish. Don't want that, then just tag both of them as the same color.

If you have a multicolor printer, you should be able to load all of the parts into the slicer under one part, and then color code accordingly.

Tagi