1 / 5
Filament Cutter Servo-Block for Ender v3 SE/KE — zdjęcie 1
1 / 5

Filament Cutter Servo-Block for Ender v3 SE/KE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Block retraction for filament cutter using MG90S/ES3004 servo

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Always Z-ready crash-block for the filament cutter. The print head only has to swing on the side when it needs to. Keeps the print-area original size by retracting the arm when not in use.

List of Materials:

  • 1x ES3004 servo OR MG90S servo. Note that the later can be directly powered from the EBB42.

  • 2x ring magnets

  • 1x M2-10 hex for ES3004 OR 1x M1.5-10 hex for MG90S

  • 1x M3-25

  • 1x M3 nut

  • 1x M3-35 screw OR print the "screwblock" and 2x M3-10

  • (optional) 1x M3 insert for the "screwblock"

  • (optional) 1x M3 nut for the "screwblock"

Used with the following filament cutters:

Tagi