Maytoni Unity Light Rail/Track cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flush cover for the Maytoni Unity Light Rail/Track
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A Cover for the Maytoni Unity Light Bar/Track System.
Make sure your Light Track is de-energized!!!
The Holder/Insert needs to be jammed into the light bar, then the cover gets clicked into it. It needs to be inserted with the flat part inside the track.
For easy installation bend the Insert into a U so that both of the extrusions touch each other. Then stick it into the track and let go it should flick into the right position and then only needs to be pushed in to the gaps on the side of the tracks. To not scratch the paint of the track i recommend a plastic spatula like the Prusa Spatula.
To remove the cover ether remove one lamp from the track and remove the cover or depending on the distance between inserts one can just press on the cover and remove it that way. The Inserts can be removed by pressing in the middle with the spatula and then remove it by moving it sideways.
I added a file for a 24cm long cover but you can create your own in the slicer by adding a cube and setting its dimensions to Size-Y: 15.4 mm and Size-Z: to 3mm and Size-X to whatever length you need.
The Cover then just gets pressed onto the already installed inserts, may need some force depending on your printer.
Printing Insert:
[email protected] Balanced
No Support
Printing Cover:
PLA/[email protected] Balanced
No Support