1 / 4
Yagi VHF-UHF for portable satellite operations + UV-K5 support — zdjęcie 1
1 / 4

Yagi VHF-UHF for portable satellite operations + UV-K5 support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts for VHF/UHF Yagi elements for portable satellite operations.

Ocena
0 / 5
Polubienia
9
Pobrania
56
Wydruki
0
Wyświetlenia
695
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I designed these element mounts to build a dual-band Yagi antenna for portable amateur radio satellite operations and UV-K5 transceiver. For the boom, I used a 20 mm plastic tube used for electrical installations.

Antenna elements - 6 mm aluminium tube:

-----------------------     2m Reflector - 1022 mm - position 0
                      |
           ------------               70 cm reflector - 322 mm - position 230 mm
                      |
  ----------- ----------      2 m-70 cm radiator - 469 + 469 mm - position 370 mm
                      |
            -----------               70 cm open sleeve - 318 mm - position 392 mm 

Balun 6 turns of coax cable (I used RG-58, see photo)


3D printed material:
- PLA+
- infill 25%
- no support
- brim 5 mm only for the grip and UV-K5 holder.

Tagi