Garmin topcap mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bicycle computer mount installed instead of top cap.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I've seen many mounts that install on the protruding part of the fork steerer tube. But my friend's steerer tube doesn't protrude from the stem. So, I designed a mount for him that replaces the top cap.
Print Settings:
Material: PETG, ABS or equivalent (PLA is not recommended)
Layer height: 0.2 mm
Infill: 100%
Supports: not needed
In addition the following parts are needed (must be purchesed eventually):
1x M6 A countersunk head screw for securing the mount to the anchor inside the fork stem
1x Garmin or Wahoo mounting plate with an outer diamter of max. Ø34 mm ( For example GARMIN K-EDGE replacement part )
2x M3x6 countersunk head screw
2x M3 heat set inserts