Garmin topcap mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bicycle computer mount installed instead of top cap.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I've seen many mounts that install on the protruding part of the fork steerer tube. But my friend's steerer tube doesn't protrude from the stem. So, I designed a mount for him that replaces the top cap.
Print Settings:
Material: PETG, ABS or equivalent (PLA is not recommended)
Layer height: 0.2 mm
Infill: 100%
Supports: not needed
In addition the following parts are needed (must be purchesed eventually):
1x M6 A countersunk head screw for securing the mount to the anchor inside the fork stem
1x Garmin or Wahoo mounting plate with an outer diamter of max. Ø34 mm ( For example GARMIN K-EDGE replacement part )
2x M3x6 countersunk head screw
2x M3 heat set inserts