Galileo 2 PG7 Umbilical Mount for StealthBurner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PG7 umbilical mount for Galileo 2 StealthBurner, using the original cable chain mounting point.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 78
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
PG7 Umbilical Mount for Galileo 2 (StealthBurner)
This remix replaces the original cable chain mount with a mount for a standard PG7 cable gland, making it suitable for an umbilical setup while preserving the original mounting method.
The mount is based on the original cable chain mount and attaches to the Galileo 2 StealthBurner extruder using the same single M3×50 screw.
Assembly
Feed the toolhead cables through the opening.
Screw the PG7 cable gland into the threaded opening.
Mount the assembly to the extruder using the original M3×50 screw.
Print Settings
Print orientation: vertical with the threaded side facing down
Print settings: standard Voron print settings
If you find this remix useful, consider posting a make or sharing any improvements you make!